The Ultimate Oil Separator for your 2015-Present Ford Expedition 3.5 Ecoboost Truck with UPR Dual Valve Plug N Play � Catch Can and UPR one way electronic pressure sensor system. State of the art ESCC = Electronic Clean Side Separator System you can be sure that no other manufacturer can give you the level of quality and performance that UPR's Dual Valve Catch Can and ECSS consistently deliver. Offering the largest capacity in a compact design to be sure that it can eliminate oil vapors on vehicles that are normally aspirated or power added equipped. This system is designed to require less maintenance between oil changes and eliminate the amount of moisture that's collected from controlling condensation better by being mounted in the engine bay. Our Patented Multi-Stage Multi-Chamber internal design is the best for controlling oil vapor and mist even in the hottest mounting locations. In turn, our new design was developed to work the best in the engine bay without any second guessing of it's true performance capabilities. This system has been tested and developed to work with the factory electronics and the parameters that the EPS / electronic pressure sensor requires. Does require drilling of your factory WOT pipe. Predrilled 3.5L WOT pipe can be purchased separately above to keep your stock pipe unmodified. Most importantly it keeps your clean side and dirty side performing with the level and control they deserve and not filling the intake and CAC / Inter-cooler full of oil like the factory designed system does. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.
THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
Pictures above show the optional Pro Series Check Valves, Drain line kit, and optional Pre-Drilled pipe with corresponding ECSS.
UPR Billet Pro Series Check Valves:
These are larger higher flowing check valves than the standard check valve. It will increase the vacuum through the catch can and deliver better crankcase evacuation. The improved crankcase evacuation translates to increased MPG and more responsive low speed drivability.
UPR Billet One-Way Valve Cover Breather:
These are Valve Cover Breathers with a one-way valve inside of it. These are designed to allow excess/positive crankcase pressure to exit through the breather when in boost. Then it closes to return to vacuum while driving to prevent un-metered air from entering to maintain perfect drivability. These are also ideal for vehicles in very cold or freezing weather as it allows crankcase pressure to escape until condensation or frozen condensation in the PCV hoses melts or thaws. This is a must to ensure maximum engine seal life.
UPR Pre-Drilled WOT Pipe:
These are pre-drilled Ford Passenger Side Turbo Inlet Pipes that make the Wide Open Throttle connection a simple bolt-on. These are a great option to be able to return your truck back to 100% stock for service or trade-in. 5030-124-PDP for F150, 5030-124-EXP for Expedition / Navigator.
UPR SS Magnetic Drain Plug:
The Stainless Steel magnetic drain plug would replace the drain plug on the bottom of the catch can with an allen head plug that has a magnet embedded into it. It will attract any ferrous metal material to it so the user can inspect it.
UPR Catch Can Drain Line Kit:
The drain line kit includes a drain valve, hose and fittings needed to install the drain valve. It allows the user to relocate the drain somewhere easier to access like the wheel well opening or bumper area.
UPR Adjustable Billet PCV Fitting:
The adjustable Billet PCV fitting which includes 4 different size jets. It eliminates the failure prone factory PCV and still allows for the needed restriction. Jet sizes and application basics for Adjustable version are explained below.
� .100 Jet size is slightly more restrictive than the factory PCV fitting to allow you to restrict the PCV for vehicles ingesting too much oil through the PCV and wanting to reduce oil consumption.
� .125 Jet size is slightly less restrictive than the factory PCV fitting to allow you to adjust the pcv to increase flow a bit more than factory for vehicles that only need minor adjustments to eliminate vapor locking in the PCV system.
� .150 Jet size is even less restrictive for the boosted vehicles that tow and are driven harder to increase flow more than factory for vehicles that only need more adjustment to eliminate vapor locking in the PCV system.
� .175 Jet size is the least restrictive compared to the factory PCV fitting and allows for the largest adjustment of the jets for modified vehicles that generate a lot of blow-by / back pressure to eliminate vapor locking / flooding the clean side of the PCV system with oil.
� 12oz Capacity Can
� Show Quality Finish
� 12oz Can measures 6" x 3"
� Prevents Oil from Entering Intake
� Patented Multi-Chamber Design Traps Oil
� High Quality CNC Machined Billet Aluminum
� Plug N Play � fittings at Can & ECSS Assembly
� Improves Fuel Economy, Throttle Response & Performance
� 5/8" Oil Resistant Continental Braided Hose included
� Available in Satin or Black - Select Finish Above
Installs in 20-30 minutes.
Includes:
� Adjustable Mounting Bracket
� OEM 5/8" Factory Connectors
� 5/8" Continental Braided Hoses
� Billet Hose Ends with Clamps
� UPR Billet Check Valves (2 PCS)
� Plug N Play � quick release connectors & billet fittings
� Dual Valve Billet Catch Can (Exclusive 4 Chamber Design)
� Clean Side Separator for use with Vapor Pressure Sensor (ECSS)
2015 2016 2017 2018 2019 2020 2021 Ford Expedition Ecoboost 3.5
