top of page

* 2011-2014 Mustang Rear Adjustable Control Arm Package
* Replaces the stock upper and lower control arms
* Installs in 2 Hours
* Both Upper and Lower Control Arms are Double Adjustable
* Dial in your Suspension and Set your Pinion Angle

 

Now available from UPR is their complete Mustang Rear Adjustable Control Arm Package for your 2011-2014 Ford Mustang GT and GT500! The ultimate package for anyone wanting to upgrade from the stock rubber bushings that want to put the power to the ground as well as dial in your pinion angle.

 

Quality Construction: All kit components are made from the highest quality materials and finishes to ensure great performance on and off the track. No one gives you the bold clean styling of our Aftermarket Dress Ups, Suspension and Performance Parts for your American Muscle Car like UPR Products! Includes Double Adjustable Upper Control Arm Kit, Double Adjustable Lower Control Arm Kit and Lower Control Arm Relocation Brackets. Installs in 2 hours or less. Includes all required hardware.

 

Fits these Vehicles: 2011 2012 2013 2014 5.0L GT GT500 Coyote Mustang Shelby Roush & Saleen Vehicles.

11-14 Pro Series CM Rear Suspsension Kit

SKU: 1999-11
$599.99Price

    Login to add products to your wishlist

    Login to add products to your wishlist

    Product Reviews

    average rating is 3 out of 5, based on 150 votes, Product ratings

    98% would recommend

    Thank you for your review.

    Cj Napier

    average rating is 5 out of 5

    Aug 17, 2022

    NA King

    I have used all of the big name tuners before I came across Ortiz and ran the fastest times I ever have, with Ortiz. . I ran my fastest time in much worse DA as well, compared to the other 2 big names. Don't waste your money like I did and go directly to the source of the fastest NA cars around!

    I recommend this product.

    SeanDev

    average rating is 5 out of 5

    May 27, 2022

    Installed on 2018 Taurus SHO

    Pump works great. To anyone who might want to save some cash and want a plug-in play install then order this fuel pump from 1A Auto
    2018 Ford Explorer V6 3.5L Turbo Passenger Side Fuel Pump Module Assembly TRQ FPA72032. Its a simple replacement. Pumps are same size, no boring/sanding ridge to make pump fit. No splicing of wires either, connector from 1A Auto is plug and play. Just reuse spacer on pump and use one of the new o-rings and your done. Took me 30 minutes. I swapped out float with OEM, explorer and SHO floats are different. Only pain is retainer on rod on housing, its plastic and you will need needle nose plyers to get it off.

    I recommend this product.

    Martha Gomez

    average rating is null out of 5

    Apr 18, 2022

    Question

    They are 2 injector’s, how many they are.?

    I recommend this product.

    Crazy Cooter

    average rating is 5 out of 5

    Apr 8, 2022

    LOVE THE E85 KIT!

    I bought the E85 conversion kit for my 3.7 from Ortiz Performance (OP) for a couple reasons. First, they specialize in the Cyclone whereas a lot of tuners don't want to bother tuning it (...cause what's the point?). Second, I talked via email at great length with one of their tuners, Lee Ament, and he was happy to take all the time I needed answering questions with detailed answers. Because of the amount of service I received before I purchased, I was convinced that I would be in good hands. I also liked that their favored injector (in the kit) is a genuine Ford part (OEM for the GT500).

    I could tell right away that the OP gas tune was superior to the canned, Bama tunes I was using previously. I could immediately feel that shifts were taking 1/3 less time to complete and I could feel a lot of throttle boost across all rpm and especially in 1st gear (low rpm). I remember asking Bama to add more throttle boost to my tune and they simply don't make changes like that.

    The E85 tune was great. Instant 10%-15% power boost and response across all rpm and really fills in the gap at lower rpm. Feels like I'm using a throttle booster, but I'm not.

    There's only so much you can do to a Cyclone without forced-induction and E85 is a welcome, significant improvement if you already have everything else.

    Installation is straight-forward, you can find a number of videos on YouTube that show exactly how to do this.

    The one important thing to note: These injectors are taller than the stock injectors and
    will not fit deep enough into the fuel rail UNLESS you do not use the stock fuel-injector clips!...which is completely OK! OP and all the above-mentioned videos will also state this. You will probably need a spacer (like a washer) on the 4 fuel rail bolts to fill a small gap. (If you don't pull the injector clips, the fuel rail will make contact with the manifold.) It will also run like crap until you put your first OP tune on it.

    I recommend this product.

    Robert J

    average rating is 5 out of 5

    Mar 29, 2022

    Wonderful Service

    Sent my manifolds in (USPS wasn’t sure about the address but they got there just fine), took a handful of days to do the porting and about another week to ship back but I’m very happy with the results. Customer service was polite and helpful regardless of how often I messaged them, definitely would recommend

    I recommend this product.

    eduardo guerra