top of page

 This Battery Tray mounted single valve catch can kit for the 23-24 F150 Raptor R is the perfect fit for your engine bay. With its extremely efficient compact design and incredible good looks We went the extra mile to ensure you get the best quality components. This kit is 100% Modular and can be fully disassembled or emptied and cleaned in seconds. It utilizes UPR Braided Hose and Billet Hose Ends to give you the Strongest and Best Performing Setup Possible- No cheap stock lines here that have been cut and spliced on! Featuring the New UPR Plug N Play ™ Catch Can Fittings, you can empty the can without removing the catch can or catch can lines from your engine, or with UPR Exclusive Push Button Fittings, you can remove the entire catch can system easily for service if need be. No drilling, no cutting so your truck can be returned 100% back to stock in minutes. We have hundreds of hours testing our new Multi-Stage Oil Separator to ensure proven results will exceed your expectations. We even got the largest oil capacity in for a compact highly efficient internal diffuser system. 4 ounces will give you the needed oil capacity to be sue the catch can does not overfill.

This new patented design is the most advanced Internal function from coalescing to condensing every aspect was engineered properly. It cannot be compared or confused with units that have side by inlets and outlets with ineffective flimsy honeycomb filters or air compressor filters to keep the cost down and never take into account how critical the separation process is. At UPR make sure that this feature and process of the catch cans performance is protected with the best diffuser systems available. UPR's Patented Multi-chamber diffuser technology in featured in every UPR catch can to capture and filter all the oil vapor and trash from getting into your air intake tract. This is the most critical feature of any catch can system. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.

Every UPR Catch Can is designed, tested and manufactured in the USA. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts. We do not use plastic catch can fittings like the competition to ensure you will never have any cracks or failures that cheap plastic fittings suffer from.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED

2023-2024 F150 Raptor R Clean Side Separator (optional)


Upgrade your existing catch can system with the UPR Clean Side Separator. Includes UPR Plug n Play Fittings to allow you to install the UPR Clean Side Catch Separator without any modifications. A simple plug n play system that will outperform anything available. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.

This Clean Side Catch Separator is especially beneficial to modified trucks or trucks with added Superchargers or Turbo kits. As crankcase pressure builds up under BOOST, it will be forced out of the driver side valve cover fitting. This clean side separator will still allow clean air to enter the crankcase as the factory intended, but will catch oil and impurities when crankcase pressure is high, preventing that gunk from getting into your cold air kit and throttle body. Once normal driving resumes, the Clean Side Separator will allow the oil mist to return to the crankcase.
 



» Show Quality Finish
» Plug N Play ™ fittings
» Prevents Oil from Entering Intake
» Exclusive 4 Stage Design Traps Oil
» Innovative Diffuser Tube and Chamber

» Can measures 2.5" x 5" 6oz Capacity
» High Quality CNC Machined Billet Aluminum

» 5/8" Oil Resistant Continental Braided Hose included
» Improves Fuel Economy, Throttle Response & Performance

» High Quality Billet Aluminum Catch Can Fittings (Not Plastic Like the Competition)
» Black Anodized Finish

UPR 23-24 Ford F-150 Raptor R Single Valve Oil Catch Can Separator Plug N Play™

SKU: 5030-291-1
$219.99Price
Quantity

Login to add products to your wishlist

Login to add products to your wishlist

Product Reviews

average rating is 3 out of 5, based on 150 votes, Product ratings

98% would recommend

Thank you for your review.

Cj Napier

average rating is 5 out of 5

Aug 17, 2022

NA King

I have used all of the big name tuners before I came across Ortiz and ran the fastest times I ever have, with Ortiz. . I ran my fastest time in much worse DA as well, compared to the other 2 big names. Don't waste your money like I did and go directly to the source of the fastest NA cars around!

I recommend this product.

SeanDev

average rating is 5 out of 5

May 27, 2022

Installed on 2018 Taurus SHO

Pump works great. To anyone who might want to save some cash and want a plug-in play install then order this fuel pump from 1A Auto
2018 Ford Explorer V6 3.5L Turbo Passenger Side Fuel Pump Module Assembly TRQ FPA72032. Its a simple replacement. Pumps are same size, no boring/sanding ridge to make pump fit. No splicing of wires either, connector from 1A Auto is plug and play. Just reuse spacer on pump and use one of the new o-rings and your done. Took me 30 minutes. I swapped out float with OEM, explorer and SHO floats are different. Only pain is retainer on rod on housing, its plastic and you will need needle nose plyers to get it off.

I recommend this product.

Martha Gomez

No ratings yet

Apr 18, 2022

Question

They are 2 injector’s, how many they are.?

I recommend this product.

Crazy Cooter

average rating is 5 out of 5

Apr 8, 2022

LOVE THE E85 KIT!

I bought the E85 conversion kit for my 3.7 from Ortiz Performance (OP) for a couple reasons. First, they specialize in the Cyclone whereas a lot of tuners don't want to bother tuning it (...cause what's the point?). Second, I talked via email at great length with one of their tuners, Lee Ament, and he was happy to take all the time I needed answering questions with detailed answers. Because of the amount of service I received before I purchased, I was convinced that I would be in good hands. I also liked that their favored injector (in the kit) is a genuine Ford part (OEM for the GT500).

I could tell right away that the OP gas tune was superior to the canned, Bama tunes I was using previously. I could immediately feel that shifts were taking 1/3 less time to complete and I could feel a lot of throttle boost across all rpm and especially in 1st gear (low rpm). I remember asking Bama to add more throttle boost to my tune and they simply don't make changes like that.

The E85 tune was great. Instant 10%-15% power boost and response across all rpm and really fills in the gap at lower rpm. Feels like I'm using a throttle booster, but I'm not.

There's only so much you can do to a Cyclone without forced-induction and E85 is a welcome, significant improvement if you already have everything else.

Installation is straight-forward, you can find a number of videos on YouTube that show exactly how to do this.

The one important thing to note: These injectors are taller than the stock injectors and
will not fit deep enough into the fuel rail UNLESS you do not use the stock fuel-injector clips!...which is completely OK! OP and all the above-mentioned videos will also state this. You will probably need a spacer (like a washer) on the 4 fuel rail bolts to fill a small gap. (If you don't pull the injector clips, the fuel rail will make contact with the manifold.) It will also run like crap until you put your first OP tune on it.

I recommend this product.

Robert J

average rating is 5 out of 5

Mar 29, 2022

Wonderful Service

Sent my manifolds in (USPS wasn’t sure about the address but they got there just fine), took a handful of days to do the porting and about another week to ship back but I’m very happy with the results. Customer service was polite and helpful regardless of how often I messaged them, definitely would recommend

I recommend this product.

eduardo guerra

average rating is 5 out of 5

Jan 3, 2022

Great customer service

Great customer service and fast, currently tuning my 2014 Mustang Twin turbo 5.0 and it runs great! thank you

I recommend this product.

Roberto Salazar

average rating is 5 out of 5

Jan 2, 2022

Roush air intake SHO

The over all ordering experience was a little lack luster at start. Ordered the intake on 12/3 and it was not going to ship for sometime due to a back order, which I don’t blame the Ortiz team at for one bit. However they quickly turn the ordering experience around, with rapid and prompt reply to my emails( no matter how much I bugged them). Once it was pretty clear the intake I wanted wasn’t going to ship before the end of the year they offered me another product at no additional charge. All in all I got a better product, excellent customer service and I’m glad and proud to say my 2015 SHO is tuned and take care of by Ortiz Performance. Greta company, great people and a great over all experience.
Thanks for all your hard work over the holidays and I’m glad I was referred to you by a fellow SHO owner.

Thanks Ortiz Performance.
Shout out to Lee as well! You rock man!

I recommend this product.

Dustin Kilby

average rating is 5 out of 5

Dec 8, 2021

Great Look!

I wish the description would have more description as to what you are ordering and the difference with/without the rear silicone boot.
It is very difficult to install the rear silicone boot on the rear turbo. I would put slightly bigger clamps where they mount on the turbos as well. But the product is top grade! Looks really great!! Performs great as well. I will be doing the hot pipes for sure from ecopower parts as well.

I recommend this product.

Allen B

average rating is 5 out of 5

Oct 9, 2021

Port work

Man quick turnaround, I had my Cj intake and my heads ported and the car feels so much better GREAT SERVICE AND GREAT PRICE I can't wait to see the numbers once it's all dialed in.

I recommend this product.

Shylow Strickland

average rating is 5 out of 5

Sep 7, 2021

@murdzilla3.7 Mustang

I purchased the Custom Tunes for my 2011 3.7, and i can honestly say Ortiz is the best tuner in the world in my opinion. 7 days a week Twice on Sunday. If you want to gap v8's and rip the streets slaying the competition, you have 100% come to the right place.

I recommend this product.

Shylow Strickland

average rating is 5 out of 5

Sep 7, 2021

@murdzilla3.7 Mustang

I purchased the Ghost Cam and Bravo 240. Hands down the best decision in my opinion. The Ghost sounds so amazing, everyone is always complimenting the idle. The drive ability is great, no issues. The Bravo is also one of my favorite things as well. As I decelerate you can literally here the bald eagles and F18's, its wild!! Seriously though it sounds like thunder with a mix of gunshots in there.. its absolutely amazing in every way. Ortiz knows best!!

I recommend this product.

Julian

average rating is 5 out of 5

Jan 14, 2021

Power Pack

I have been running this tune/package on my SHO for over a year. Increased performance and fuel economy...never thought you could get both. Lee’s customer support and Luis’ tuning and turnaround time was beyond impressive. Luis reviewed multiple datalogs until deciding the car was running perfectly and safely, making smooth power and shifting on point. They answered any questions and concerns almost immediately and an updated tune was sent within 24 hours. That’s what will keep me coming back.

I recommend this product.

load more

bottom of page